Owatrol Coatings UK Deck Paint And Treatment Owatrol Aquanett – Solvent Free Wood Oil Remover

At A Glance…

• Removes previously applied oils including teak oil from any wood surface
• Restores the natural colour of the wood
• Gel consistency will not run making it ideal for vertical surfaces
• Prepares wood for a new coating, improving penetration and adhesion
• Suitable for environmentally sensitive areas

DESCRIPTION

Properties

• Removes teak and other oils from all woods blackened by UV rays.
• Gel consistency.
• Ready to use – Easy Application
• Oils are dissolved in water.
• Ready to use.
• Easy application.
• Does not contain solvent or paraffin.
• Biodegradable.

Where to use

Apply direct on wood : outdoor furnitures, caillebotis, decks. Except oak, chesnut
Directions

Apply a thick layer of Aquanett to surface to be stripped.
Allow to stand 5 minutes max.
Apply 2nd application as soon as wet look of 1st application has disappeared and allow to penetrate (15 – 20 minutes)
Scrub surface with stiff nylon brush and rinse with water using the highest pressure source available or use a pressure washer (max. 60 bar).
Using hot water makes stripping easier.
Always neutralise surface after with Net-trol.

Specifications

Coverage:	4m² per litre
Tools:	Synthetic brush/scrubbing brush, roller with synthetic cover
Suitable for:	Exterior use
Clean up:	Water
Working Time:	Up to 5 mins
Suitable Surfaces:	All exterior wood coated with wood oils

IMPORTANT: Always neutralise after with Net-Trol